Soleus-air PH1-14R-03 Manuel d'utilisateur télécharger pdf (Page 17)

TROUBLESHOOTING

Before seeking repair or service, please check the following:

ERROR MESSAGES

Diagnostic system indicators appear if any of the following interrupts operation of the unit. The unit may

require simple maintenance or repair by a qualified service technician.

CODE DIAGNOSIS ACTION

FAULT E1 Faulty room temperature sensor Contact customer service for repair or service.

FAULT E2 Faulty inside sensor. Contact customer service for repair or service.

FAULT E3 Internal frost in the unit. Wait for unit to defrost

FAULT E4 Unit malfunctions. Contact customer service for repair or service.

PROBLEM POSSIBLE CAUSE REMEDY

Unit does not operate or

only runs in fan mode.

Is the unit plugged in? Securely plug the power cord into the wall outlet.

Is the main power supply on? Reestablish the main power supply.

Is the water container full indicator light on? Empty the water container.

Is the timer set? Change timer settings.

Cooling efficiency is not

satisfactory.

Is the air inlet or outlet blocked? Clear the blocking.

Is there any other heat source in the room? Move the heat source.

Are the air filters dirty? Clean the air filters.

Is the temperature setting suitable? Change the temperature setting.

Is the fan speed set at low? Increase the fan speed.

Unit is noisy or vibrates.

Is the machine positioned unevenly on a

level surface?

Place the unit on a level surface.

The unit starts and

stops frequently.

Is the voltage from the power source correct? Use a proper power source.

Is the exhaust hose positioned incorrectly?

Position the exhaust hose correctly and keep the

exhaust hose straight as possible.

1 2 ... 12 13 14 15 16 17 18 19

Pas de commentaire

Soleus-air PH1-14R-03 Manuel d'utilisateur Page 17