Soleus Air SG-PAC-10E2 Manuel d'utilisateur télécharger pdf (Page 16)

PROBLEM

The Air Conditioner will not start

POSSIBLE CAUSES

The air conditioner is unplugged or not

connected well.

The fuse is blown/circuit breaker is

tripped.

Power Failure

The current interrupter device is

tripped.

SOLUTIONS

x Make sure the air conditioner plug

is pushed completely into the out-

let

x Check the house fuse/circuit

breaker box a

nd replace the fuse

or reset the breaker.

x The unit will automatically re-start

when power is restored.

x There is a protective time delay

(approx. 3 minutes) to prevent

tripping of the compressor

overload. For this reason, the unit

may not start normal cooling for 3

minutes after it is turned back on.

x Press the RESET button located

on the power cord plug.

x If the RESET button will not stay

engaged, discontinue use of the

air conditioner and contact a

qualified service technician.

TROUBLESHOOTING

The Air Conditioner does not cool

as it should

Airflow is restricted

The temperature control may not be

set correctly.

The air filter is dirty

The room may be too warm

Cold air is escaping

The Evaporator is frozen

x Make sure there are no curtains,

blinds, or furniture blocking the

front of the air conditioner

x Lower the set thermostat tempera-

ture

x Clean the filter. See the Cleaning

and Care Section of the manual.

x Please allow time for the room to

cool down after turning on the air

conditioner.

x Check for open furnace registers

and cold air returns

x The unit is defrosting and

will re-

sume o

pe

r

ati

on wh

en do

n

e.

The Remote Control is not working

The batteries are inserted incorrectly

The batteries may be dead

x Check the position of the batteries.

x Replace the batteries

1

1 2 ... 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire